excl VAT
Product code: YT-99760
Available quantity 1
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
YATO |
|
Model |
YT-99760 |
|
Series |
GRF |
|
Product type |
Infrared liquid fuel heater |
|
Heating capacity |
13 kW |
|
Manufacturer-declared heating area |
70–90 m² |
|
Fuel type |
Diesel |
|
Fuel tank capacity |
22 L |
|
Fuel consumption |
1 kg/h |
|
Declared operating time per full tank |
Approx. 18 hours |
|
Fuel pump pressure |
8 bar |
|
Temperature adjustment |
Yes |
|
Thermostat |
Manually adjustable |
|
Control panel |
Digital |
|
Display |
LED |
|
Timer |
1–24 hours |
|
Timer adjustment interval |
1 hour |
|
Operating temperature range |
0–55 °C* |
|
Electrical supply |
220–240 V AC |
|
Frequency |
50 Hz |
|
Motor power |
60 W |
|
Electrical insulation class |
I |
|
Power cord length |
1.2 m |
|
Housing |
Powder-coated metal |
|
Dimensions |
820 × 426 × 1008 mm |
|
Weight |
36.6 kg |
| Manufacturer: | YATO |
The YATO YT-99760 is a 13 kW infrared diesel heater designed for heating workshops, warehouses, production facilities, technical rooms, and other well-ventilated working environments. The unit can also be used during construction and renovation work where heating specific work areas or surfaces is required.
Unlike conventional fan-forced air heaters, this model transfers heat directly to objects and surfaces within its radiation zone using infrared energy. The heated surfaces gradually release warmth into the surrounding environment, allowing heat to be felt quickly without producing an intense stream of hot air.
The heater features a 22-litre fuel tank, digital control panel, LED display, adjustable thermostat, and 1–24-hour timer. The manufacturer specifies an indicative heating area of 70–90 m² and an operating time of approximately 18 hours per full tank.
13 kW infrared heating – for intensive heating of working areas and surfaces.
70–90 m² declared heating area – indicative manufacturer specification.
Direct heat transfer to objects – infrared radiation primarily heats surfaces within the radiation zone.
Reduced air movement – does not create the same intense hot air stream as conventional fan heaters.
22-litre fuel tank – suitable for longer operating periods.
Approximately 18 hours of declared runtime – depending on fuel consumption and operating conditions.
Digital control and LED display – for convenient monitoring of operating parameters.
1–24-hour timer – allows operating duration to be selected in one-hour increments.
Powder-coated metal housing – designed for working environments.
The YATO YT-99760 uses infrared radiant heating technology.
Thermal radiation reaches objects, floors, walls, and other surfaces within the heater's operating area. These surfaces absorb energy, warm up, and gradually transfer heat to the surrounding environment.
This heating method can be particularly practical when the goal is to heat a specific workstation, equipment, or surfaces rather than primarily raising the temperature of the entire room.
Because the heater does not rely on intensive forced hot air circulation, less dust is disturbed. However, heating performance depends on distance, surface properties, ambient temperature, and other operating conditions.
The manufacturer declares 13 kW heating capacity and an indicative 70–90 m² heating area.
These characteristics make the model suitable for workshops, technical facilities, construction sites, and other working environments requiring targeted heating.
Actual heating performance depends on room volume, insulation, initial temperature, surface properties, and the ventilation required for safe operation.
The YATO YT-99760 features an integrated 22-litre fuel tank, with manufacturer-specified fuel consumption of 1 kg/h.
The declared operating time per full tank is approximately 18 hours.
This is an indicative value that may vary depending on actual fuel consumption, thermostat settings, operating cycles, and environmental conditions.
The heater features a digital control panel with an LED display.
The manually adjustable thermostat allows users to select the desired heating settings, while the timer enables an operating duration of 1 to 24 hours, adjustable in one-hour increments.
These functions make it easier to plan heating periods and adapt operation to specific tasks.
The YATO YT-99760 can be used in properly ventilated workshops, automotive service centres, warehouses, manufacturing facilities, utility rooms, and construction or renovation sites.
Infrared heating can also be used for surface drying applications when permitted by the technical requirements of the materials involved.
When drying surfaces, consider material temperature resistance, distance from the heater, and adequate moisture removal from the room.
The heater operates on a 220–240 V, 50 Hz electrical supply. The specified motor power is 60 W.
The housing is made of powder-coated metal. Dimensions are 820 × 426 × 1008 mm, and weight is 36.6 kg.
Before installation or positioning, consider the heater's dimensions, weight, and the manufacturer's required safety clearances.
The YATO YT-99760 is a fuel-burning infrared heater and must only be operated in properly ventilated areas in accordance with the manufacturer's instructions.
Combustion consumes oxygen and generates combustion products. Inadequate ventilation or combustion faults can cause dangerous carbon monoxide accumulation.
The heater must be placed on a stable, level, non-combustible surface. Its surfaces can become extremely hot during operation, so appropriate clearances from people and combustible materials must be maintained.
Do not open the heater's access door while it is operating. Before performing maintenance, switch off the unit, disconnect the electrical supply, and allow it to cool.
