excl VAT
Product code: YT-99710
Available quantity 10
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
YATO |
|
Model |
YT-99710 |
|
Series |
GRF |
|
Product type |
Electric PTC fan heater |
|
Maximum heating power |
5000 W (5 kW) |
|
Manufacturer's indicated heating area |
Up to 48 m²* |
|
Operating modes |
50 / 3300 / 5000 W |
|
Fan-only mode |
Yes, without active heating |
|
Airflow capacity |
604 m³/h |
|
Heating element type |
PTC ceramic |
|
Thermostat |
Automatic reset |
|
Thermostat protection temperature |
75 °C |
|
Overheating protection |
Yes |
|
Operating indicator |
Yes |
|
Electrical supply |
380–400 V AC, three-phase (3~) |
|
Frequency |
50 Hz |
|
Water protection rating |
IPX4 |
|
Power cord length |
1.6 m |
|
Housing material |
Metal |
|
Housing finish |
Powder-coated |
|
Dimensions |
300 × 235 × 345 mm |
|
Weight |
4.32 kg |
|
Intended use |
Heating rooms and work areas |
* Up to 48 m² is the manufacturer's indicative maximum heating area. Actual heating performance depends on room volume, ceiling height, insulation, initial temperature, and heat loss.
| Manufacturer: | YATO |
The YATO YT-99710 is a 5000 W electric fan heater equipped with a PTC ceramic heating element, designed for heating workshops, garages, warehouses, manufacturing facilities, and other working environments. According to the manufacturer, the heater is suitable for spaces of up to 48 m². Its 604 m³/h airflow helps distribute warm air and provides increased air circulation throughout the heated area.
The heater offers three operating modes: a 50 W fan-only setting, 3300 W partial heating, and 5000 W maximum heating. The PTC ceramic heating element provides self-regulating temperature characteristics, while integrated overheating protection and an automatic-reset thermostat add protective functionality. The unit operates from a 380–400 V three-phase electrical supply and features an IPX4 water splash protection rating.
5000 W maximum heating power – designed for more intensive heating of workshops, warehouses, garages, and work areas.
PTC ceramic heating element – electrical resistance increases as the element temperature rises, naturally limiting heating power.
Three operating modes – choose between fan-only operation and two heating power levels.
604 m³/h airflow capacity – helps distribute heated air throughout larger working environments.
Overheating protection – integrated automatic-reset protective thermostat with a specified protection temperature of 75 °C.
IPX4 protection rating – provides protection against water splashes under the conditions specified by the rating.
Metal housing – powder-coated construction and a weight of 4.32 kg allow the heater to be used and moved between different work locations.
|
Mode |
Power |
Application |
|---|---|---|
|
Fan-only |
50 W |
Air circulation without active heating |
|
Partial heating |
3300 W |
Supplementary heating at a lower power setting |
|
Maximum heating |
5000 W |
More intensive heating of a room or work area |
The heater uses PTC (Positive Temperature Coefficient) technology. The electrical resistance of this type of ceramic heating element increases as its temperature rises, giving the heating element self-regulating temperature characteristics.
PTC technology works alongside the integrated overheating protection and automatic-reset protective thermostat. These features do not replace safe operating practices. The heater must not be covered, placed too close to combustible materials, or operated with blocked air openings.
The YATO YT-99710 is designed for workshops, garages, automotive service centers, warehouses, manufacturing facilities, and utility rooms. It can also be used as a supplementary heat source during construction, repair, and renovation work when an increase in ambient temperature is required.
The heater may help accelerate certain drying processes, provided that the building material manufacturers' requirements regarding permissible temperatures and ventilation are followed.
The YATO YT-99710 requires a 380–400 V three-phase electrical supply. Unlike the smaller 2 kW and 3 kW single-phase models, this heater cannot be connected directly to a standard 230 V domestic power outlet.
Before operation, ensure that the electrical installation, power connector, and protective devices meet the manufacturer's requirements.
Important: the IPX4 protection rating indicates resistance to water splashes under the applicable test conditions, but the heater is not intended for immersion in water or operation in unrestricted wet conditions. Do not cover the heater, and keep all air inlets and outlets unobstructed. Always follow the safety clearances specified in the manufacturer's operating instructions.
