excl VAT
Product code: YT-99705
Available quantity 10
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
YATO |
|
Model |
YT-99705 |
|
Series |
GRF |
|
Product type |
Electric PTC fan heater |
|
Maximum heating power |
3000 W (3 kW) |
|
Manufacturer's indicated heating area |
Up to 30 m²* |
|
Operating modes |
30 / 2000 / 3000 W |
|
Fan-only mode |
Yes, without active heating |
|
Airflow capacity |
245 m³/h |
|
Heating element type |
PTC ceramic |
|
Thermostat |
Automatic reset |
|
Thermostat protection temperature |
85 °C |
|
Overheating protection |
Yes |
|
Operating indicator |
Yes |
|
Electrical supply |
220–240 V AC |
|
Frequency |
50 Hz |
|
Water protection rating |
IPX0 |
|
Power cord length |
1.3 m |
|
Dimensions |
247 × 168 × 265 mm |
|
Weight |
2.1 kg |
|
Intended use |
Heating rooms and work areas |
* Up to 30 m² is the manufacturer's indicative maximum heating area. Actual heating performance depends on room volume, ceiling height, insulation, initial temperature, and heat loss.
| Manufacturer: | YATO |
The YATO YT-99705 is a compact 3000 W electric fan heater equipped with a PTC ceramic heating element, designed for supplementary heating of rooms and work areas. According to the manufacturer, the heater is suitable for spaces of up to 30 m². It can be used in dry workshops, garages, utility rooms, small warehouses, and other suitable indoor environments.
The heater offers three operating modes: a 30 W fan-only setting, 2000 W partial heating, and 3000 W maximum heating. Its 245 m³/h airflow helps distribute warm air, while the PTC ceramic heating element provides self-regulating temperature characteristics. Integrated overheating protection, an automatic-reset thermostat, and a lightweight 2.1 kg construction add convenience for everyday use.
3000 W maximum heating power – designed for supplementary heating of rooms and work areas.
PTC ceramic heating element – electrical resistance increases as the element temperature rises, naturally limiting heating power.
Three operating modes – choose between fan-only operation and two heating power levels.
245 m³/h airflow capacity – helps distribute heated air throughout the room.
Overheating protection – integrated automatic-reset protective thermostat with a specified protection temperature of 85 °C.
Compact and portable construction – dimensions of 247 × 168 × 265 mm and a weight of 2.1 kg make the heater easy to move.
Single-phase electrical supply – operates from a 220–240 V power supply without requiring a three-phase 400 V connection.
|
Mode |
Power |
Application |
|---|---|---|
|
Fan-only |
30 W |
Air circulation without active heating |
|
Partial heating |
2000 W |
Supplementary heating at a lower power setting |
|
Maximum heating |
3000 W |
More intensive heating of a room or work area |
The heater uses PTC (Positive Temperature Coefficient) technology. The electrical resistance of this type of ceramic heating element increases as its temperature rises, giving the heating element self-regulating temperature characteristics.
PTC technology operates alongside the heater's integrated overheating protection but does not replace safe operating practices. The heater must not be covered, placed too close to combustible materials, or operated with blocked air inlets or outlets.
The YATO YT-99705 can be used in dry workshops, garages, utility rooms, small warehouses, and work areas. It is also suitable as a supplementary heat source during repair, installation, or renovation work, provided that environmental conditions comply with the manufacturer's operating instructions.
The fan-only mode allows the unit to circulate air without active heating, while the two heating power levels make it possible to select an operating mode according to heating requirements.
The heater operates from a 220–240 V / 50 Hz single-phase electrical supply, so a three-phase 400 V connection is not required. At its maximum 3000 W power rating, the unit may draw approximately 13 A from a 230 V supply, making a properly rated electrical installation and power outlet essential.
Important: the IPX0 protection rating means the heater has no declared protection against water ingress. It must be used in dry environments and protected from rain, water splashes, and moisture. Do not cover the heater or block its air openings. Always follow the manufacturer's specified safety clearances from combustible materials.
